Home Assistant OS 12.4

Versie 12.4 van Home Assistant OS is uitgekomen. Home Assistant OS is een minimaal, op Buildroot gebaseerd besturingssysteem dat het mogelijk maakt om op een fysieke of virtuele machine Home Assistant te draaien. In versie 12.4 is onder meer Docker bijgewerkt naar versie 26.1.4, Buildroot naar 2024.02.3 en de Linux-kernel voor de meeste ondersteunde platforms naar versie 6.6.31. De complete changelog voor deze uitgave ziet er als volgt uit:

Known Issues

• Some Raspberry Pi users have reported system lockups with some Z-Wave and Zigbee USB adapters. This is an unresolved bug in the Raspberry Pi kernel, workaround is to use the DWC2 driver by adding dtoverlay=dwc2 to config.txt. See #3362 for details.
• Fujitsu Esprimo Q920 fails to boot with GRUB bootloader distributed in this OS release, updating to 12.4.rc1 may cause a boot failure and manual intervention might be needed, see #3348 for details.
• For ODROID-N2 (and Home Assistant Blue) this release reverts U-Boot update which is believed to be the cause of some intermittent issues when booting from eMMC. If you had any trouble previously after an update to OS 11.5 or newer, please see #3227 and help us with tracing this issue. Also note that some new eMMC modules with the Kingston chips are not supported yet – this is tracked in #3250.

Home Assistant Operating System

• Bump Docker to v26.1.4 (#3411)
• Update Buildroot to 2024.02.3 (#3406)

Build System

• Use Genimage for declarative image layout (#3388)
• Bump docker/build-push-action from 5.3.0 to 5.4.0 (#3405)
• Bump docker/login-action from 3.1.0 to 3.2.0 (#3399)

Raspberry Pi

• Set tty0 in cmdline as the default preferred console (#3402)
• RaspberryPi: Update kernel to 6.6.31 – stable_20240529 (#3400)

Home Assistant Yellow

• Set tty0 in cmdline as the default preferred console (#3402)
• RaspberryPi: Update kernel to 6.6.31 – stable_20240529 (#3400)
• Linux: Update kernel to 6.6.32 (#3394)

Home Assistant Green

• Linux: Update kernel to 6.6.33 (#3415)
• Fix writing to eMMC in U-Boot on Green (#3412)
• Set tty0 in cmdline as the default preferred console (#3402)
• Use U-Boot tarball for all boards (#3361)

Open Virtual Appliance

• Linux: Update kernel to 6.6.33 (#3415)
• Set tty0 in cmdline as the default preferred console (#3402)
• Bump buildroot to update openvmtools to 12.3.0 (again) (#3370)

Generic x86-64

• Linux: Update kernel to 6.6.33 (#3415)
• Set tty0 in cmdline as the default preferred console (#3402)

Hardkernel ODROID

• Linux: Update kernel to 6.6.33 (#3415)
• Temporary revert ODROID-N2 U-Boot to 2023.01 to fix eMMC issues (#3409)
• Set tty0 in cmdline as the default preferred console (#3402)
• Use U-Boot tarball for all boards (#3361)

ASUS Tinker

• Linux: Update kernel to 6.6.33 (#3415)
• Set tty0 in cmdline as the default preferred console (#3402)

Khadas VIM Series

• Linux: Update kernel to 6.6.33 (#3415)
• Set tty0 in cmdline as the default preferred console (#3402)

Generic aarch64

• Linux: Update kernel to 6.6.33 (#3415)
• Set tty0 in cmdline as the default preferred console (#3402)