New features:
- Simplified configuration for connection to a fiber optic modem (ONT)
- The speed of the Ethernet connection between LAN 1/WAN and the upstream device (e.g., fiber optic modem) is displayed on the overview page
Further improvements and bugfixes
DSL:
- Fixed: Establishing a VDSL connection took very long or was repeatedly disrupted
Internet:
- Fixed: During active VPN connection over WireGuard® with transmission of entire network traffic, the FRITZ!Box allowed selection of user for HTTPS access
- Fixed: In certain browser versions https pages were not filtered reliably
- Fixed: Incorrect entry for the NTP server in DHCPv6 reply of the FRITZ!Box resulted in IPv6 home network devices not being able to obtain a valid time
Telephony:
- Fixed: Telekom CompanyFlex SIP trunking – Outgoing calls failed when telephone number suppressed
- Fixed: Under certain conditions, voice transmission was disrupted after a short time during ongoing telephone calls
- Improved The list of voice codecs for telephony was reworked for the provider Telekom
Smart Home:
- Fixed: Devices that were registered with the FRITZ!Smart Gateway were not displayed on the user interface of the connected FRITZ!Box
- Fixed: Link for automatic adjustment between an external temperature sensor and a radiator control was lost when the FRITZ!Box restarted
- Fixed: Status of the FRITZ!DECT 350 was transmitted incorrectly in the Smart Home home network
- Fixed: The freely selectable device name for FRITZ!DECT 350 was not adopted
- Fixed: Under certain circumstances empty Smart Home pages were displayed in the FRITZ!Box user interface
System:
- Fixed: After failed download of a FRITZ!OS update, under certain circumstances no further update queries
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, a successfully established internet connection via DOCSIS was sporadically not detected and an incorrect error page was then displayed
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, a backup of the FRITZ!Box internal memory unnecessarily included files that were saved on an external USB storage device connected to the FRITZ!Box
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, an error occurred if an IPv4 address range other than the preset range was used in the home network
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, the IP filter list was not transferred to the new FRITZ!Box
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, the settings for DNS rebind protection were not transferred to the new FRITZ!Box
- Fixed: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, the “Factory settings” status of the new FRITZ!Box was not always reliably detected and it was not possible to transfer the settings
- Improved: When using the “Transfer Your Settings to a New FRITZ!Box” wizard, the settings for the captive portal of a public Wi-Fi hotspot are now transferred to the new FRITZ!Box
