The Chinese memory manufacturer Netac Technology achieves memory speeds of up to 8,000 MT/s with a low CAS latency of 38 clock cycles with its Z-RGB and DDR5 memory series RAM kits. The memory chips from SK Hynix, which are designed for high clock frequencies, are responsible for the high transfer rates.
SK Hynix A-Die enable up to 8,000 MT/s
Based on the A-Die memory chips from the South Korean semiconductor manufacturer SK Hynix, which are known for their high memory clocks, the Chinese RAM manufacturer Netac Technology has launched a total of six new memory kits with DDR5-6000, -6200, -6600, -7200, – 7600 and -8000.
All six RAM kits are available with a total capacity of 16 GB (2× 8 GB), 32 GB (2× 16 GB) and offered in the following configurations:
- DDR5-6000 CL36-36-36-96 at 1 ,35 volts
- DDR5-6200 CL32-38-38-96 at 1.35 volts
- DDR5-6600 CL34-40-40-105 at 1.4 volts
- DDR5-7200 CL34-45-45-115 at 1.4 volts
- DDR5-7600 CL36-46-46-122 at 1.4 volts
- DDR5-8000 CL38-48-48-128 at 1.5 volts
< p class="p text-width">The (A)RGB lighting on the crown of the heat conducting plates (heat spreader), which is now obligatory especially for high-clocking memory modules, should not be missing in the Z-RGB series either. It should be able to be configured with any known RGB software as well as the mainboards of all manufacturers. The memory modules are offered in a glossy and a matte finish.
< /figure>
Netac Z-RGB DDR5-8000 CL38-48-48-128 (Image: Netac Technology)
The Chinese website IT Home, which was the first to report on the new memory kits, also listed further RAM kits from an entry-level series with DDR5-4800 CL40 at 1 ,1 volt, DDR5-5600 CL40 at 1.2 volt and DDR5-6000 at 1.35 volt in prospect.
DDR5-4800 to DDR5-6000 and a CAS latency of 40 cycles (Image: Netac Technology)Regarding possible prices and availability, no information has been given yet nnt.